Pattern PPGI ( forest, marble, flower pattern ppgi for Bangladesh Market)

Yearly capacity: 700,000 tons
Thickness: 0.12-2.0mm Width:900-1250mm
Grade: DC01, DC02,DC03
Aluzinc/zinc coating: AZ 35-11-, Z35-200
Paint Type: 15+5 um (PE, HDP, PVDF)

Compare
Categories: , Tag:

Introduction

Color-coated Printed Steel Coil Definition:

Color-coated printed steel coil, also called printed coil, is prepared by being coated with a layer of paint and baked pattern is printed out using the gravure technologies ,then a layer of clear lacquer is coated and after being baked again, color-coated printed steel coil is obtained.
Patterns: Patterns are typical wood texture (as shown in the figure). Special requirements from customers may be met via negotiation and research otherwise.

INK OR PAINTING OIL?  THE PRICE IS DIFFERENT

INK IS MORE EXPENSIVE. MOST CLIENTS WILL CHOOSE INK.

 

 

 

Application:

Mainly applied to decoration for interior and exterior walls and indoor items.

Metal Embossed Color-coated Steel coil Definition:

Metal embossed color-coated steel coil is the product prepared via being color-coated and applied to produce embossed patterns on color-coated steel coil.
Application: Metal embossed color-coated steel coil is extensively applied as indoor decoration panels because of its good stereoscopic impression.

Provided specification:

Metal embossed color-coated steel coil is not limited by coating types. But the substrate thickness is normally no more than 0.60mm as it may make the metal hard to deform.

 

 

Advantages of Jianglin PPGL

1.Previously Jianglin starts from PPGL production, and with years experience, we have accumulated enough practical production advantages.Jianglin has cultivated a research team on painting formula. Based on different atmosphere, Jianglin can give client more practical suggestion and choice.

2. From hot rolled coil to PPGL, Jianglin has one stop processing center to reduce the cost to the lowest level.

3. Located near Tianjin port, from factory to Tianjin port only take 40 minutes.

4. Famous brand with highly guarantee, Jianglin with more than 20 years development can give client most guarantee on price and quality.

 

The basic parameters

Thickness(mm) 0.18-1.2mm
Width(mm) 900-1250mm
Inside Diameter(mm) 508/610mm
Outside Diameter(mm) 2000mm
Weight ≤25T per coil
Grade TDC51D+AZ, TDC53D+AZ, TS250GD+AZ,TS300GD+AZ, TS350GD+AZ, TS550GD+AZ
Aluzinc thickness 30/30, 40/40, 50/50, 60/60, 75/75, 90/90, 110/110
Painting type PE, GDP, PVDF
Painting Thickness 15+5/5+7um, 20+5um/7+10um based on clients’ requirement

 

Application guidance:

Buildings and Construction Roofing, Siding, Sashes, Shutters, Rain Doors, Various Fixtures, Partitions, Ceilings, Fences, Sheds.
Transportation Air Cleaners, Pipes, Marine Panels, Oil filters, Dash panels.
Gas and Kerosene Devices Heaters, Cooking Stoves, Kerosene Tanks, Hot Water Equipment, Ducts.
Kitchen Equipment Ovens, Ranges, Sinks, Kitchen Units, Shelves, Toilet Stands, Cooker Wrappers.
Electrical and Lighting Equipment Washing Machines, Refrigerators, Room Coolers, Fluorescent Light Housings, Switch Boxes, Motor Cases, Distribution Boards, Copy Machines.
Furniture and Office Equipment Steel Furniture, Partitions, Curtains, Walls, Blinds.
Agriculture Drying Machines and Other Farm Equipment, Greenhouses, Silos, Barns, Sheds.
Containers and Others. Vending Machines, Display Cases, Cans, Pressure, Bins, Signboards.

 

 

1.Cold rolled base material

China Q/FWG001 Baosteel Q/BQB402/403 Japan JISG3141 U.S ASTM Europe EN10130-1999
SPCC-FH SPCD C01 SPCC A366A A366B DC01
SPCD-FH SPCD DC03 SPCD A620A A620B DC03

 

2. Galvanizing

Q/HYB201-08 Q/HYB202-06 JIS G3302 Aluzinc JIS G 3321  EN10327-04 Structural
EN10326-04
ASTM A653M-04
SGCC SGCC/(SGHC) SGLCC DX51D+Z CS Type A/B/C
SGCD SGCD SGLCD DX52D+Z FS Type A/B
S250 S250GD+Z SS255
S280 SGC340 S280GD+Z SS275/ Grade 40
S320 SGC400 S320GD+Z
S350 SGC440 S350GD+Z SS340/ Grade 50

 

3.Zinc Coating Reference

GB/T2518-2004  JIS G 3302 Q/HYB201  EN10327  ASTM A653M
Zinc coating 001 Z001
Z60 Z060
Z80 Z08 Z08 Z080
Z90
Z100 Z10 Z10 Z100 Z100
Z120 Z12 Z12 Z120 Z120
Z180 Z18 Z18 Z180 Z180
Z250 Z25 Z25 Z250 Z250
Z275 Z27 Z27 Z275 Z275
Z350 Z35 Z35 Z350 Z350
Base material 02 SGCC SGCC DX51D+Z CS Type A/B/C
03 SGCD SGCD DX52D+Z

 

4. Prepainted Galvanized product grade and application

PPGI/GL Steel grade Grade of base metal Application
TDC51D+Z DC51D+Z normal use
TDC52D+Z DC52D+Z drawing
TDC53D+Z DC53D+Z deep drawing
TS280GD+Z S280GD+Z structure
TS350GD+Z S350GD+Z structure
TS550GD+Z S550GD+Z high strength structure
TDC51D+AZ DC51D+AZ normal use
TDC52D+AZ DC52D+AZ drawing
TS250GD+AZ S250GD+AZ structure
TS300GD+AZ S300GD+AZ structure
TS350GD+AZ S350GD+AZ structure
TS550GD+AZ S550GD+AZ high strength structure

 

Production

Welcome to Jianglin!

Jiang Lin Steel Corporation production line introduction

Specification Rolling production Galvanizing production PPGL production
Installation time 2002 2008 2012
Capacity 700,000 tons 650,000 tons 350,000 tons
Thickness 0.12-3.0mm(mostly 0.3-0.8mm)
Width 900-1550mm 700-1550mm 900-1550mm
Coil weight 3-15 MT
Base material Cold rolled, GI, Aluzinc coil
Grade SGCC, SGHC
Paint Type PE, SMD, HDP, PVDF
Function Surface Different printed pattern(marble, wooden grain), antifinger, static free, chameleon

 

Cold Rolling Production

Jianglin is equiped with  3 production lines of 6 rolls rolling machinery guarantee the precise thickness of the coils. Yearly processing capacity is more than 700,000 tons.

Galvanizing Production Line

Jianglin is equipped with 3 production lines of galvanizing including one Zinc coating line and two Aluzinc production line. Yearly production is around 600,000 tons. Some of the cold rolled coils are sold to different factories.

For thickness, we focus on 0.3-0.8mm. Most of Shandong market galvanized coil are from Jianglin.

PPGL and PPGI production line.

Jianglin PPGL is mostly for oversea clients, which has high quality requirement on zinc coating thickness.

Logistics

Management

Jianglin Steel corporation is strictly applying 6S management system. For past 5 years, though the global steel market is under very tough environment, we have reached up to 5%-9% revenue increase.

 

Package:

There are basically two kinds of packing method.

Standarded sea freight package Simple package for short delivery

 

QC

For each and every batch of GI, PPGI, PPGL, we will check all the thickness, surface, and other parameters, just to guarantee the quality. Meanwhile, we have compelte order tracking system to make every coil trackable. Any mistake happening, we will be responsible.

 


Forwarder

Jianglin with production capacity of 700,000 tons per year, we have been collaborating the listed shipping companies in the world including COSCO, WORLD WIDE LOGISTICS, CMA, and other shipping companies. During the peak season when containers are hard to book, we always enjoy the previlige to book the shipment with a suitable price and schedule

Payment terms

Jianglin is ready to accept any reasonable payment terms including LC , just hope for a win win situation. Meanwhile, we also collaborate with Alibaba. Alibaba safety guarantee order is welcome.

F&Q

  1. What is the minimum order quantity (MOQ)?
    – Normally, the MOQ forcoilis one coil 3-5 tons.

2.What is the payment method?
– For new customers: 30%T/T deposit 70%T/T Before shipment.
– For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.

For strategic partner, we can accept 30days LC.

3.What is the acceptable currency?
– We accept USD, EUR and RMB.

4.What is the delivery time?
– 5-10 days in advance depending on the stock status.

5.Where is the loading port?
– Normally, our loading ports are Tianjin, and Shandong. Or client can assign any port in China.

6.What is the delivery term?
– FOB, CIF, CFR, EXW, DDP

7.Do you offer free samples?
– Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.