Color-coated Printed Steel Coil Definition:
Color-coated printed steel coil, also called printed coil, is prepared by being coated with a layer of paint and baked pattern is printed out using the gravure technologies ,then a layer of clear lacquer is coated and after being baked again, color-coated printed steel coil is obtained.
Patterns: Patterns are typical wood texture (as shown in the figure). Special requirements from customers may be met via negotiation and research otherwise.
Mainly applied to decoration for interior and exterior walls and indoor items.
Metal Embossed Color-coated Steel coil Definition:
Metal embossed color-coated steel coil is the product prepared via being color-coated and applied to produce embossed patterns on color-coated steel coil.
Application: Metal embossed color-coated steel coil is extensively applied as indoor decoration panels because of its good stereoscopic impression.
Metal embossed color-coated steel coil is not limited by coating types. But the substrate thickness is normally no more than 0.60mm as it may make the metal hard to deform.
Advantages of Jianglin PPGL
1.Previously Jianglin starts from PPGL production, and with years experience, we have accumulated enough practical production advantages.Jianglin has cultivated a research team on painting formula. Based on different atmosphere, Jianglin can give client more practical suggestion and choice.
2. From hot rolled coil to PPGL, Jianglin has one stop processing center to reduce the cost to the lowest level.
3. Located near Tianjin port, from factory to Tianjin port only take 40 minutes.
4. Famous brand with highly guarantee, Jianglin with more than 20 years development can give client most guarantee on price and quality.
The basic parameters
|Weight||≤25T per coil|
|Grade||TDC51D+AZ, TDC53D+AZ, TS250GD+AZ,TS300GD+AZ, TS350GD+AZ, TS550GD+AZ|
|Aluzinc thickness||30/30, 40/40, 50/50, 60/60, 75/75, 90/90, 110/110|
|Painting type||PE, GDP, PVDF|
|Painting Thickness||15+5/5+7um, 20+5um/7+10um based on clients’ requirement|
|Buildings and Construction||Roofing, Siding, Sashes, Shutters, Rain Doors, Various Fixtures, Partitions, Ceilings, Fences, Sheds.|
|Transportation||Air Cleaners, Pipes, Marine Panels, Oil filters, Dash panels.|
|Gas and Kerosene Devices||Heaters, Cooking Stoves, Kerosene Tanks, Hot Water Equipment, Ducts.|
|Kitchen Equipment||Ovens, Ranges, Sinks, Kitchen Units, Shelves, Toilet Stands, Cooker Wrappers.|
|Electrical and Lighting Equipment||Washing Machines, Refrigerators, Room Coolers, Fluorescent Light Housings, Switch Boxes, Motor Cases, Distribution Boards, Copy Machines.|
|Furniture and Office Equipment||Steel Furniture, Partitions, Curtains, Walls, Blinds.|
|Agriculture||Drying Machines and Other Farm Equipment, Greenhouses, Silos, Barns, Sheds.|
|Containers and Others.||Vending Machines, Display Cases, Cans, Pressure, Bins, Signboards.|
1.Cold rolled base material
|China Q/FWG001||Baosteel Q/BQB402/403||Japan JISG3141||U.S ASTM||Europe EN10130-1999|
|SPCC-FH||SPCD C01||SPCC||A366A A366B||DC01|
|SPCD-FH||SPCD DC03||SPCD||A620A A620B||DC03|
|Q/HYB201-08||Q/HYB202-06||JIS G3302||Aluzinc JIS G 3321||EN10327-04||Structural|
|SGCC||–||SGCC/(SGHC)||SGLCC||DX51D+Z||–||CS Type A/B/C|
|SGCD||–||SGCD||SGLCD||DX52D+Z||–||FS Type A/B|
|–||S280||SGC340||–||–||S280GD+Z||SS275/ Grade 40|
|–||S350||SGC440||–||–||S350GD+Z||SS340/ Grade 50|
3.Zinc Coating Reference
|GB/T2518-2004||JIS G 3302||Q/HYB201||EN10327||ASTM A653M|
|Base material||02||SGCC||SGCC||DX51D+Z||CS Type A/B/C|
4. Prepainted Galvanized product grade and application
|PPGI/GL Steel grade||Grade of base metal||Application|
|TS550GD+Z||S550GD+Z||high strength structure|
|TS550GD+AZ||S550GD+AZ||high strength structure|